Show Tacacs Command; Set Tacacs Command - Enterasys SECURESTACK C3 Configuration Manual

show tacacs command

show tacacs command
Use this command to display the status (enabled or disabled) of TACACS+ accounting or
authorization on a per‐command basis.
Syntax
show tacacs command {accounting | authorization}
Parameters
accounting
authorization
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to display the state of the TACACS+ client's command authorization.
C3(rw)->show tacacs command authorization
TACACS+ command authorization state:

set tacacs command

Use this command to enable or disable TACACS+ accounting or authorization on a per‐command
basis.
Syntax
set tacacs command {accounting | authorization} {enable | disable}
Parameters
accounting |
authorization
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
In order for per‐command accounting or authorization by a TACACS+ server to take place, the
command must be executed within an authorized session.
Display the status of TACACS+ accounting on a per‐command basis.
Display the status of TACACS+ authorization on a per‐command basis.
enabled
Specifies either TACACS+ accounting or authorization to be enabled or
disabled.
Enable or disable accounting or authorization on a per‐command basis.
TACACS+ Configuration
SecureStack C3 Configuration Guide 27-9