Show System Utilization - Enterasys Matrix 2G4072-52 Configuration Manual

General Configuration Command Set
Setting Basic Device Properties
2.2.3.9

show system utilization

Use this command to display system resource utilization information.
show system utilization [cpu | process | storage] [slot slot]
Syntax Description
cpu | process |
storage
slot slot
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display all system utilization information for the module in slot 1:
Matrix(rw)->show system utilization slot 1
CPU Utilization Threshold Traps enabled: Threshold = 80.0%
Total CPU Utilization:
Slot
---------------------------------------------------
1
** Output continued on next page **
2-54 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays total CPU, individual process, or
storage resource utilization only.
(Optional) Displays system resource utilization for a
specific module.
If not specified, CPU, process, and storage system utilization information will
be displayed.
If not specified, information for all modules will be displayed.
CPU
1
5 sec 1 min
3.6% 3.0%
5 min
3.0%