Set Dhcp Pool Bootfile; Clear Dhcp Pool Bootfile - Enterasys SECURESTACK C3 Configuration Manual

set dhcp pool bootfile

set dhcp pool bootfile
Use this command to specify a default boot image for the DHCP clients who will be served by the
address pool being configured.
Syntax
set dhcp pool poolname bootfile filename
Parameters
poolname
filename
Defaults
None.
Mode
Switch command, read‐write.
Example
This example sets the boot image filename for address pool named "auto1."
C3(rw)->set dhcp pool auto1 bootfile image1.img

clear dhcp pool bootfile

Use this command to remove a default boot image from the address pool being configured.
Syntax
clear dhcp pool poolname bootfile
Parameters
poolname
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes the boot image filename from address pool named "auto1."
C3(rw)->clear dhcp pool auto1 bootfile
16-20 DHCP Server Configuration
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the boot image file name.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.