Example
This example shows how to enable RMON alarm entry 3:
C2(rw)->set rmon alarm status 3 enable
clear rmon alarm
Use this command to delete an RMON alarm entry.
Syntax
clear rmon alarm index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON alarm entry 1:
C2(rw)->clear rmon alarm 1
Event Group Commands
Purpose
To display and clear RMON events, and to configure RMON event properties.
Commands
For information about...
show rmon event
set rmon event properties
set rmon event status
clear rmon event
show rmon event
Use this command to display RMON event entry properties.
Specifies the index number of entry to be cleared.
clear rmon alarm
Refer to page...
13-11
13-12
13-13
13-14
SecureStack C2 Configuration Guide 13-11