Show Rmon Stats; Set Rmon Stats - Enterasys SECURESTACK C3 Configuration Manual

show rmon stats

show rmon stats
Use this command to display RMON statistics measured for one or more ports.
Syntax
show rmon stats [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, RMON stats will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display RMON statistics for Gigabit Ethernet port 1 in switch 1.
:
C3(su)->show rmon stats ge.1.1
Port: ge.1.1
-------------------------------------
Index
Owner
Data Source
Drop Events
Collisions
Jabbers
Broadcast Pkts
Multicast Pkts
CRC Errors
Undersize Pkts
Oversize Pkts
Fragments
Table 15‐2 provides an explanation of the command output.

set rmon stats

Use this command to configure an RMON statistics entry.
Syntax
set rmon stats index port-string [owner]
Parameters
index
port‐string
owner
15-4 RMON Configuration
(Optional) Displays RMON statistics for specific port(s).
= 1
= monitor
= ifIndex.1
= 0 Packets
= 0 Octets
= 0 0 - 64 Octets
= 0 65 - 127 Octets
= 0 128 - 255 Octets
= 0 256 - 511 Octets
= 0 512 - 1023 Octets
= 0 1024 - 1518 Octets
= 0
Specifies an index for this statistics entry.
Specifies port(s) to which this entry will be assigned.
(Optional) Assigns an owner for this entry.
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0