Show Console; Set Console Baud - Enterasys SECURESTACK C3 Configuration Manual

Mode
Switch command, read‐write.
Example
This example shows how to set the system timeout to 10 minutes:
C3(su)->set logout 10

show console

Use this command to display console settings.
Syntax
show console [baud] [bits] [flowcontrol] [parity] [stopbits]
Parameters
baud
bits
flowcontrol
parity
stopbits
Defaults
If no parameters are specified, all settings will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display all console settings:
C3(su)->show console
Baud
------
9600

set console baud

Use this command to set the console port baud rate.
Syntax
set console baud rate
Parameters
rate
(Optional) Displays the input/output baud rate.
(Optional) Displays the number of bits per character.
(Optional) Displays the type of flow control.
(Optional) Displays the type of parity.
(Optional) Displays the number of stop bits.
Flow Bits StopBits
------- ---- ----------
Disable 8 1
Sets the console baud rate. Valid values are: 300, 600, 1200, 2400, 4800, 5760,
9600, 14400, 19200, 38400, and 115200.
Parity
------
none
SecureStack C3 Configuration Guide 3-31
show console