Table of Contents
Advertisement
Configure Ports
Highlight Configure Ports from the main menu and press
enter:
Toggle the View Ports:<1 to 12 > field, using the space
bar, to view the configuration of either ports 1 through 12 or
ports 13 through 24. To configure an specific port, toggle
the Configure Port:[ ] field until the appropriate port
number appears.
Toggle the State:<Enabled> field to either Enable or
Disable a given port.
Toggle the Speed/Duplex:<Auto> field to either select the
speed and duplex/half-duplex state of the port. Auto – auto-
negotiation between 10 and 100 Mbps devices, full- or half-
duplex. The Auto setting allows the port to automatically
determine the fastest settings the device the port is
connected to can handle, and then to use those settings.
The other options are 100M/Full, 100M/Half, 10M/Full,
10M/Half. There is no automatic adjustment of port settings
with any option other than Auto.
9033691-01
Figure 1-17. Configure Ports Screen
VH-2402-L3 Management Guide 23
Advertisement
Table of Contents
