Configuring Security Requirements For Administrators And Users; Configuring Infranet Controller Source Ip Access Restrictions; Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

CHAPTER 7
Configuring Security Requirements for
Administrators and Users
Configuring Infranet Controller Source IP Access Restrictions (NSM Procedure)
Copyright © 2010, Juniper Networks, Inc.
Configuring Infranet Controller Source IP Access Restrictions (NSM
Procedure) on page 61
Configuring Infranet Controller Browser Access Restrictions (NSM
Procedure) on page 63
Configuring Infranet Controller Certificate Access Restrictions (NSM
Procedure) on page 64
Configuring Infranet Controller Password Access Restrictions (NSM
Procedure) on page 66
Configuring Infranet Controller Host Checker Access Restrictions (NSM
Procedure) on page 67
Configuring Infranet Controller RADIUS Request Attribute Restrictions for User Realms
(NSM Procedure) on page 69
Configuring the Number of Concurrent Sessions and Concurrent Users for Infranet
Controller Users (NSM Procedure) on page 70
Source IP access restrictions control from which IP addresses users can access an Infranet
Controller sign-in page, be mapped to a role, or access a resource.
To configure Infranet Controller source IP access restrictions:
In the navigation tree, select Device Manager> Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure source IP access restrictions.
Click the Configuration tab. In the Configuration tree, select:
3.
Administrators > Admin Roles > Select Role > General > Restrictions > Source IP
Restrictions to configure source IP access restrictions for admin roles.
Administrators > Admin Realms > Select Realm > Authentication Policies > Source
IP to configure source IP access restrictions for admin realms.
61