Figure 15 Ip Routing Page - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Figure 15 IP Routing Page
Default Gateway
Set the default gateway as the main access point to external networks, including the Internet.
To set the default gateway:
1. Enter an IP address in the Default gateway text box and click Set Default Gateway to
immediately apply changes.
2. Click Save at the top of the page to make them persistent across reboots. See
Static and Dynamic Routes
A static route is a hard coded (manually defined) path that specifies the route to a certain
subnet using a certain path. See
View all configured static and dynamic routes:
•
Destination—The subnet/path for this static route.
•
Mask—The netmask for this route.
•
Gateway—The configured gateway (path to the Internet) for this static route.
Configuring Interfaces, Default Gateway, Static Routes, DNS and Domain Names, Hostname and Banners (Web
Media Flow Controller Configuration Tasks (Web Interface)
Figure 15.
Figure 15.