Ip Multicast-Routing Permanent-Mroute - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip multicast-routing permanent-mroute

Syntax
Release Information
Description
Options
Mode
862
ip multicast-routing permanent-mroute accessListName
no ip multicast-routing permanent-mroute
Command introduced before JunosE Release 7.1.0.
Specifies that newly created mroutes that match the specified access list do not get
timed out. The no version of this command prevents any new mroutes from becoming
permanent. However, it does not remove any existing permanent mroutes. To remove
existing permanent mroutes, use the clear ip mroute command.
accessListName—Name of the IP access list that contains the mroutes
Global Configuration
Copyright © 2010, Juniper Networks, Inc.