Ip Vrf - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip vrf

Syntax
Release Information
Description
Options
Mode
964
ip vrf vrfName
no ip vrf vrfName [ wait-for-completion [ waitSeconds ] ]
Command introduced before JunosE Release 7.1.0.
Creates a VRF or accesses VRF Configuration mode to configure a VRF. The no version
deletes the VRF.
NOTE: After creating the VRF, you must configure a route distinguisher for
it via the rd command; otherwise, the VRF will not operate.
vrfName—Name of the VRF; a string of 1–32 alphanumeric characters
wait-for-completion—Specifies (in the absence of waitSeconds) that the CLI waits for
completion of the no version operation before it returns a prompt, regardless of how
long that takes. Use the wait-for-completion keyword with the no version if you require
a synchronous, deterministic deletion of a VRF, such as when executing Telnet or
console commands by means of an external script. If you do not issue the
wait-for-completion keyword in these circumstances, an ip vrf command issued as
soon as the prompt appears might fail because the router is still deleting the VRF.
waitSeconds—Number of seconds in the range 1–64000 that the CLI waits before it
returns a prompt, regardless of whether the no version operation has completed
Global Configuration
Copyright © 2010, Juniper Networks, Inc.