Show Multiauth Station; Show Multiauth Session - Enterasys SecureStack C2 Configuration Manual

show multiauth station

Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to clear the port multiple authentication mode on port
C2(rw)->clear multiauth port mode ge.3.14
This example shows how to clear the number of users on port
C2(rw)->clear multiauth port numusers ge.3.14
show multiauth station
Use this command to display multiple authentication station (end user) entries.
Syntax
show multiauth station [mac address] [port port-string]
Parameters
mac address
port port‐string
Mode
Switch command, read‐only.
Defaults
If no options are specified, multiple authentication station entries will be displayed for all MAC
addresses and ports.
Example
This example shows how to display multiple authentication station entries. In this case, two end
user MAC addresses are shown:
C2(rw)->show multiauth station
Port
------------ ------------
ge.1.20
ge.2.16

show multiauth session

Use this command to display multiple authentication session entries.
Syntax
show multiauth session [all] [agent {dot1x | mac | pwa}] [mac address]
[port port-string]
18-36 Security Configuration
(Optional) Displays multiple authentication station entries for specific MAC
address(es).
(Optional) Displays multiple authentication station entries for specific
port(s).
Address type Address
------------------------
mac 00-10-a4-9e-24-87
mac 00-b0-d0-e5-0c-d0
.3.14:
ge
.3.14:
ge