Clear Authentication Login - Enterasys SECURESTACK C3 Configuration Manual

Stackable switches

Hide thumbs Also See for SECURESTACK C3:

Table of Contents

set authentication login {any | local | radius | tacacs}

Switch command, Read‐Write.

This example shows how to set the authentication login method to use the local password settings:

C3(rw)->set authentication login local

clear authentication login

Use this command to reset the authentication login method to the default setting of "any".

clear authentication login

Switch command, Read‐Write.

This example shows how to reset the authentication login method.

C3(rw)->clear authentication login

Specifies that the authentication protocol will be selected using the

following precedence order:

Specifies that the local network password settings will be used for

authentication login.

Specifies that RADIUS will be used for authentication login.

Specifies that TACACS+ will be used for authentication login.

clear authentication login

SecureStack C3 Configuration Guide 26-5

Show Quick Links

Table of Contents

Do you have a question about the SECURESTACK C3 and is the answer not in the manual?