Table of Contents
Advertisement
Example
This example shows how to enable enhanced buffer mode:
B3(su)->set system enhancedbuffermode enable
Changes in the enhanced buffer mode will require resetting this unit.
Are you sure you want to continue? (y/n)
show time
Use this command to display the current time of day in the system clock.
Syntax
show time
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the current time. The output shows the day of the week,
month, day, and the time of day in hours, minutes, and seconds and the year:
B3(su)->show time
THU SEP 05 09:21:57 2002
set time
Use this command to change the time of day on the system clock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
[mm/dd/yyyy]
[hh:mm:ss]
Defaults
None.
Sets the time in:
month, day, year and/or
24‐hour format
At least one set of time parameters must be entered.
SecureStack B3 Configuration Guide 3-15
show time
Advertisement
Table of Contents
