Show System Login - Enterasys SecureStack C2 Configuration Manual

show system login

For information about...
set system password aging
set system password history
show system lockout
set system lockout
show system login
Use this command to display user login account information.
Syntax
show system login
Parameters
None.
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to display login account information. In this case, switch defaults have
not been changed:
C2(su)->show system login
Password history size: 0
Password aging
Username
admin
ro
rw
Table 3‐1 provides an explanation of the command output.
Table 3-1 show system login Output Details
Output
Password history size
Password aging
Username
Access
State
3-2 Basic Configuration
: disabled
Access State
super-user enabled
read-only enabled
read-write enabled
What It Displays...
Number of previously used user login passwords that will be checked for
duplication when the set password command is executed. Configured with
system password history (page
Number of days user passwords will remain valid before aging out. Configured
with set system password aging (page
Login user names.
Access assigned to this user account: super-user, read-write or read-only.
Whether this user account is enabled or disabled.
Refer to page...
3-6).
3-5).
3-5
3-6
3-6
3-7
set