Show Logging Server - Enterasys SECURESTACK C3 Configuration Manual

show logging server

For information about...
clear logging default
show logging application
set logging application
clear logging application
show logging local
set logging local
clear logging local
show logging buffer
show logging interface
set logging interface
clear logging interface
show logging server
Use this command to display the Syslog configuration for a particular server.
Syntax
show logging server [index]
Parameters
index
Defaults
If index is not specified, all Syslog server information will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display Syslog server configuration information:
C3(ro)->show logging server
IP Address
-------------------------------------------------------------------------
1 132.140.82.111 local4 warning(5)
2 132.140.90.84
Table 14‐1 provides an explanation of the command output.
14-2 Logging and Network Management
(Optional) Displays Syslog information pertaining to a specific server
table entry. Valid values are 1‐8.
Facility Severity
local4 warning(5)
Description Port Status
default 514 enabled
default 514 enabled
Refer to page...
14-6
14-6
14-7
14-9
14-9
14-10
14-10
14-11
14-11
14-12
14-13