Clear Policy Profile; Purpose; Show Policy Rule - Enterasys SecureStack C2 Configuration Manual

clear policy profile

Use this command to delete a policy profile entry.
Syntax
clear policy profile profile-index
Parameters
profile‐index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete policy profile 8:
C2(su)->clear policy profile 8
Configuring Classification Rules

Purpose

To review, create, assign, and unassign classification rules to policy profiles. This maps user
profiles to protocol‐based frame filtering policies.
Commands
For information about...

show policy rule

show policy capability
set policy rule
clear policy rule
clear policy all-rules
show policy rule
Use this command to display policy classification rule information.
Specifies the index number of the profile entry to be deleted. Valid values
are 1 to 255.
Note: B3, C3, and G3 devices support profile-based CoS traffic rate limiting only. Policy rules
specifying CoS will not rate limit on these devices, or on mixed stacks including B3 or C3 devices.
clear policy profile
Refer to page...
9-5
9-8
9-9
9-12
9-13
SecureStack C2 Configuration Guide 9-5