Clear Port Discard - Enterasys Matrix 2G4072-52 Configuration Manual

VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
7.3.3.14

clear port discard

Use this command to reset the frame discard mode to the factory default setting (none).
clear port discard port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset Fast Ethernet port 7 in module module2 to the default discard
mode of "none":
Matrix(rw)->clear port discard fe.2.7
7-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the port(s) for which to reset frame discard mode.
For a detailed description of possible port-string values,
refer to Section 4.1.1.