Table of Contents
Advertisement
Mode
Switch command, read‐write.
Usage
Once a VLAN is created, you can assign it a name using the set vlan name command described in
"set vlan name" on page 8‐5.
Each VLAN ID must be unique. If a duplicate VLAN ID is entered, the device assumes that the
Administrator intends to modify the existing VLAN.
Enter the VLAN ID using a unique number between 1 and 4093. The VLAN IDs of 0 and 4094 and
higher may not be used for user‐defined VLANs.
Examples
This example shows how to create VLAN 3:
B3(su)->set vlan create 3
This example shows how to disable VLAN 3:
B3(su)->set vlan disable 3
set vlan name
Use this command to set or change the ASCII name for a new or existing VLAN.
Syntax
set vlan name vlan-list vlan-name
Parameters
vlan‐list
vlan‐name
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the name for VLAN 7 to green:
B3(su)->set vlan name 7 green
clear vlan
Use this command to remove a static VLAN from the list of VLANs recognized by the device.
Syntax
clear vlan vlan-list
Specifies the VLAN ID of the VLAN(s) to be named.
Specifies the string used as the name of the VLAN (1 to 32 characters).
set vlan name
SecureStack B3 Configuration Guide 8-5
Advertisement
Table of Contents
