Set Linkflap Action; Clear Linkflap Action - Enterasys SecureStack B3 Configuration Manual

set linkflap action

set linkflap action
Use this command to set reactions to a link flap violation.
Syntax
set linkflap action port-string {disableInterface | gensyslogentry | gentrap |
all}
Parameters
port‐string
disableInterface
gensyslogentry
gentrap
all
Defaults
None.
Mode
Switch mode, read‐write.
Example
This example shows how to set the link flap violation action on port
entry.
B3(rw)->set linkflap action ge.1.4 gensyslogentry

clear linkflap action

Use this command to clear reactions to a link flap violation.
Syntax
clear linkflap action [port-string] {disableInterface | gensyslogentry | gentrap
| all}
Parameters
port‐string
disableInterface
gensyslogentry
gentrap
all
Defaults
If port‐string is not specified, actions will be cleared on all ports.
5-24 Port Configuration
Specifies the port(s) on which to set the link flap action.
Sets the reaction as disabling the interface.
Sets the reaction as generating a syslog entry.
Sets the reaction as generating an SNMP trap.
Sets the reaction as all of the above.
(Optional) Specifies the port(s) on which to clear the link flap action.
Clears the reaction as disabling the interface.
Clears the reaction as generating a syslog entry.
Clears the reaction as generating an SNMP trap.
Clears the reaction as all of the above.
.1.4 to generating a Syslog
ge