Gathering Technical Support Information; Purpose; Command; Show Support - Enterasys SECURESTACK C3 Configuration Manual

Gathering Technical Support Information

Purpose

To gather common technical support information.

Command

For information about...

show support

show support
Use this command to display switch information for troubleshooting.
Syntax
show support
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Usage
This command initiates a number of show commands to easily gather basic information from an
installed device. To use this command, set your console to capture the output to a file first, before
executing the command, since the output is extensive.
Output from the following commands is gathered by this command:
• show version
• show logging buffer
• show port status
• show system utilization process
• show system utilization storage
• show config
Example
There is no display example because the output of this command is quite lengthy.
Gathering Technical Support Information
Refer to page...
3-55
SecureStack C3 Configuration Guide 3-55