Clearing And Closing The Cli; Purpose; Commands; Cls (Clear Screen) - Enterasys SECURESTACK C3 Configuration Manual

Mode
Switch command, read‐write.
Example
This example shows how to clear the retry value to the default of 5 retries.
C3(rw)-> clear tftp retry

Clearing and Closing the CLI

Purpose

To clear the CLI screen or to close your CLI session.

Commands

For information about...
cls
exit

cls (clear screen)

Use this command to clear the screen for the current CLI session.
Syntax
cls
Parameters
.
None
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to clear the CLI screen:
C3(su)->cls
Clearing and Closing the CLI
Refer to page...
3-49
3-50
SecureStack C3 Configuration Guide 3-49