Setting Up Managed Hosts; Using Nat With Strm; Configuring A Managed Host; Assigning A Component To A Host - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 Administration Manual

80 U D
SING THE EPLOYMENT
Step 5
Step 6
Step 7
Step 8
Renaming
Components
Step 1
Step 2
Step 3
Step 4
Managing Your
System View
E
DITOR
Click Next.
Click Finish.
Repeat for all remaining off-site sources and targets.
From the main menu, select File > Save to staging.
Note: If you update your Event Collector configuration or the monitoring ports, you
must manually update your source and target configurations to maintain the
connection between deployments.
You may wish to rename a component in your view to uniquely identify
components through your deployment.
To rename a component:
Select the component you wish to rename.
From the menu, select Actions > Rename Component.
Note: You can also use the right mouse button (right-click) to access the Action
menu items.
The Rename component window appears.
Enter a new name for the component. The name must be alphanumeric with no
special characters.
Click Ok.
The System View allows you to manage all managed hosts in your network. A
managed host is a component in your network that includes STRM software. If you
are using a STRM appliance, the components for that appliance model appear. If
your STRM software is installed on your own hardware, the System View includes
a Host Context component. The System View allows you to select which
component(s) you wish to run on each managed host.
Using the System View, you can:
Set up managed hosts in your deployment. See
•
Use STRM with NATed networks in your deployment. See
•
STRM.
Update the managed host port configuration. See
•
Assign a component to a managed host. See
•
Host.
STRM Administration Guide
Setting Up Managed
Using NAT with
Configuring a Managed
Assigning a Component to a
Hosts.
Host.