Ip Igmp-Proxy Unsolicited-Report-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip igmp-proxy unsolicited-report-interval

Syntax
Release Information
Description
Options
Mode
822
ip igmp-proxy unsolicited-report-interval tenths-of-a-second
no ip igmp-proxy unsolicited-report-interval
Command introduced before JunosE Release 7.1.0.
Specifies how often the upstream interface should transmit unsolicited reports. This
command has no effect on interfaces other than the upstream value. The no version
transmits unsolicited reports using the default value, 400 tenths of a second.
NOTE: Issue this command only on the upstream interface. Otherwise, this
command will have no effect.
tenths-of-a-second—Time interval at which the interface transmits unsolicited reports
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.