Ip Igmp Oif-Map - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip igmp oif-map

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip igmp oif-map mapName { interfaceType interfaceSpecifier | self }
[ groupPrefix [ sourcePrefix ] ]
Command introduced before JunosE Release 7.1.0.
Creates an outgoing interface (OIF) map. The no version removes an outgoing interface
map attribute or the entire outgoing interface map.
mapName—Name of the OIF map
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
self—Specifies that the multicast outgoing interface is the same as IGMP join interface
groupPrefix—Group prefix in the form ipAddress/maskLength
sourcePrefix—Source prefix in the form ipAddress/maskLength
Global Configuration
Chapter 10: I Commands
819