Configuring Bookmarks For Virtual Desktop Resource Profiles; Configuring Bookmarks For Virtual Desktop Resource Profiles (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide

Configuring Bookmarks for Virtual Desktop Resource Profiles (NSM Procedure)

Table 32: Bookmarks for Virtual Desktop Resource Profile Details
Options
Name
Description
Desktops
Username
Password Type
Variable Password
Explicit Password
Preferred Client
Session Reliability and Auto-client
reconnect
134
When you create a virtual desktop resource profile, the device automatically creates a
bookmark that links to the server that you specified in the resource profile. The device
allows you to modify this bookmark as well as create additional bookmarks to the same
server.
To configure resource profile bookmarks for virtual desktop profiles:
In the NSM navigation tree, select Device Manager >Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
resource profile bookmarks for virtual desktop profiles.
Click the Configuration tree tab, and select Users > Resource Profiles > Virtual
2.
Desktops.
Click any virtual desktop profile that is already created.
3.
Click the Bookmark tab to modify an existing session bookmark. Or, click New
4.
Bookmark to create an additional session bookmark.
Modify the settings as described in Table 32 on page 134.
5.
Click OK to save the changes.
6.
Your Action
Enter the session bookmark name.
Enter the session bookmark description.
Select All Desktops or Subset of selected Desktops from the drop-down list.
The option selected would be available to the user. The desktop list is retrieved
from the connection broker using the credentials defined in the profile resource
page.
Enter the username for the bookmark session.
Select Variable Password or Password from the drop-down list as the password
type.
Enter a variable password. This option gets enabled only when you choose
Variable Password as the password type.
Enter an explicit password. This option gets enabled only when you choose
Password as the password type.
Select Automatic Detection, Citrix Client, or Java from the drop-down list as the
preferred client.
Select the check box to automatically reconnect the session reliability.
Copyright © 2010, Juniper Networks, Inc.