Clear Rmon Filter - Enterasys SECURESTACK C3 Configuration Manual

Mode
Switch command, read‐write.
Example
This example shows how to create RMON filter 1 and apply it to channel 9:
C3(rw)->set rmon filter 1 9 offset 30 data 0a154305 dmask ffffffff

clear rmon filter

Use this command to clear an RMON filter entry.
Syntax
clear rmon filter {index index | channel channel}
Parameters
index index |
channel channel
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON filter entry 1:
C3(rw)->clear rmon filter index 1
Clears a specific filter entry, or all entries belonging to a specific channel.
SecureStack C3 Configuration Guide 15-21
clear rmon filter