Ip Nfs - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip nfs

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip nfs { source-address ipAddress
| source-interface interfaceType interfaceSpecifier }
no ip nfs { source-address | source-interface }
Command introduced before JunosE Release 7.1.0.
Specifies the E Series interface that the current virtual router uses to exchange NFS
communications with an NFS server. The no version prevents this interface from sending
or receiving NFS communications for the current virtual router.
ipAddress—IP address of an E Series interface that sends and receives NFS
communications
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Chapter 10: I Commands
873