Ip Nat Outside Source Static - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip nat outside source static

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip nat outside source static globalIpAddress localIpAddress
[ no ] ip nat outside source static { tcp | udp } globalIpAddress globalPort localIpAddress
localPort
Command introduced before JunosE Release 7.1.0.
Translates the source address when routing a packet from the outside network to the
inside network, and " untranslates" the destination address when a packet travels from
the inside network to the outside network. The no version removes the static translation
and purges the associated translations from the translation table.
tcp—Indicates a TCP port
udp—Indicates a UDP port
globalIpAddress—Inside global address
globalPort—Inside global TCP or UDP port
localIpAddress—Inside local address
localPort—Inside local TCP or UDP port
Global Configuration
Chapter 10: I Commands
869