Ip Nat Inside Source Static - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip nat inside source static
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip nat inside source static localIpAddress globalIpAddress
[ no ] ip nat inside source static { tcp | udp } localIpAddress localPort globalIpAddress
globalPort
Command introduced before JunosE Release 7.1.0.
Creates static translations for a source address when routing a packet from the inside
network to the outside network, and " untranslates" the destination address when a
packet returns from the outside network to the inside network. The no version removes
the static translation and purges the associated translations from the translation table.
tcp—Indicates a TCP port
udp—Indicates a UDP port
localIpAddress—Inside local address
localPort—Inside local TCP or UDP port
globalIpAddress—Inside global address
globalPort —Inside global TCP or UDP port
Global Configuration
Chapter 10: I Commands
867
Advertisement
Table of Contents
