Ip Igmp Ssm-Map Enable - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip igmp ssm-map enable
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip igmp ssm-map enable
Command introduced before JunosE Release 7.1.0.
Enables SSM mapping on the router. SSM mapping statically assigns sources to IGMPv1
and IGMPv2 groups. You must use SSM mapping for IGMPv1 and IGMPv2 hosts to
interoperate with PIM SSM. SSM mapping allows the router to use a statically configured
list to translate (* ,G) memberships to (S,G) memberships. The no version disables the
SSM map.
Privileged Exec, User Exec
Chapter 10: I Commands
829
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers