Ip Igmp Explicit-Tracking - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ip igmp explicit-tracking

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip igmp explicit-tracking [ disable-if-igmp-v2-detected ]
Command introduced in JunosE Release 8.2.0.
Enables explicit host tracking for IGMP interfaces. The no version disables explicit host
tracking on the interface or with the disable-if-igmp-v2-detected keyword reverts to
the default explicit host tracking.
disable-if-igmp-v2-detected—Disables explicit host tracking if IGMP V2 hosts detected
on IGMP V3 interfaces
Interface Configuration, Profile Configuration
Chapter 10: I Commands
815