13.13 Debugging In A System With Tlbs - ARM ARM1176JZF-S Technical Reference Manual

13.13 Debugging in a system with TLBs

ARM DDI 0301H
ID012310
Debugging in a system with TLBs has to be as non-invasive as possible. There has to be a way
to put the TLBs in a state where their contents are not affected by the debugging process. The
processor enables you to put the TLBs in this mode using CP14 c11. See CP14 c11, Debug State
MMU Control Register on page 13-23.
Copyright © 2004-2009 ARM Limited. All rights reserved.
Non-Confidential, Unrestricted Access
Debug
13-44