Change History - ARM ARM1176JZF-S Technical Reference Manual

ARM DDI 0301H
ID012310
ARM1176JZF-S
Technical Reference Manual
Copyright © 2004-2009 ARM Limited. All rights reserved.
Release Information
The following changes have been made to this book.
Date Issue Confidentiality
19 July 2004 A Non-Confidential
18 April 2005 B Non-Confidential
29 June 2005 C Non-Confidential
22 March 2006 D Non-Confidential
19 July 2006 E Non-Confidential
19 April 2007 F Non-Confidential
15 February 2008 G Non-Confidential
27 November 2009 H Non-Confidential
Proprietary Notice
Words and logos marked with or
®
countries, except as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may
be the trademarks of their respective owners.
Neither the whole nor any part of the information contained in, or the product described in, this document may be
adapted or reproduced in any material form except with the prior written permission of the copyright holder.
The product described in this document is subject to continuous developments and improvements. All particulars of the
product and its use contained in this document are given by ARM in good faith. However, all warranties implied or
expressed, including but not limited to implied warranties of merchantability, or fitness for purpose, are excluded.
This document is intended only to assist the reader in the use of the product. ARM Limited shall not be liable for any
loss or damage arising from the use of any information in this document, or any error or omission in such information,
or any incorrect use of the product.
Where the term ARM is used it means "ARM or any of its subsidiaries as appropriate".
Figure 14-1 on page 14-2 reprinted with permission from IEEE Std. 1149.1-2001, IEEE Standard Test Access Port and
Boundary-Scan Architecture by IEEE Std. The IEEE disclaims any responsibility or liability resulting from the
placement and use in the described manner.
Some material in this document is based on IEEE Standard for Binary Floating-Point Arithmetic, ANSI/IEEE Std
754-1985. The IEEE disclaims any responsibility or liability resulting from the placement and use in the described
manner
Confidentiality Status
This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license
restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this
document to.
Unrestricted Access is an ARM internal classification.
Copyright © 2004-2009 ARM Limited. All rights reserved.
Non-Confidential, Unrestricted Access
Change
First release.
Minor corrections and enhancements.
r0p1 changes, addition of CPUCLAMP
Figure 10-1 updated.
Section 10.4.3 updated.
Table 23-1 updated.
Minor corrections and enhancements.
Update for r0p2. Minor corrections and enhancements.
Patch update for r0p4.
Update for r0p6 release. Minor corrections and enhancements.
Update for r0p7 release. Minor corrections and enhancements.
Update for r0p7 maintenance release. Minor corrections and enhancements.
are registered trademarks or trademarks of ARM
™

Change history

Limited in the EU and other
®
ii