Bridge Learn - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bridge learn

bridge { bridgeGroupName | vplsName } learn addressCount
Syntax
no bridge { bridgeGroupName | vplsName } learn
Command introduced before JUNOSe Release 7.1.0.
Release Information
vplsName variable added in JUNOSe Release 7.1.0.
Sets the maximum number of dynamic MAC addresses that a bridge group or VPLS
Description
instance can learn. The no version restores the default value, 0 (zero) learned
addresses. The default value implies that there is no maximum number of learned
entries for an individual bridge group or VPLS instance; that is, a bridge group or
VPLS instance can learn an unlimited number of MAC addresses, up to the maximum
number that the router supports.
To enable or disable the ability of a bridge group or VPLS instance to learn dynamic
MAC addresses, use the bridge acquire command.
NOTE: For information about the maximum number of learned MAC address entries
combined for all bridge groups and VPLS instances supported per chassis, see JUNOSe
Release Notes, Appendix A, System Maximums.
Options
Global Configuration
Mode
Related Topics
bridgeGroupName Name of a bridge group specified with the bridge command
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
addressCount Maximum number of MAC addresses that the bridge group can
learn, in the range 0–64000
Configuring Optional Attributes for VPLS Instances in the JUNOSe BGP and MPLS
Configuration Guide
Chapter 3: B Commands
319
bridge learn