Bridge Vpls Route-Target - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bridge vpls route-target

[ no ] bridge vplsName vpls route-target { import | export | both } extendedCommunity
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Creates or adds to a list of VPN extended communities that the router uses to
Description
determine which routes are imported by a VPLS instance that uses BGP as the
signaling protocol. The no version removes a route target from the specified list.
A route is imported into the BGP address family for a specified VPLS instance when
both of the following conditions are met:
The bridge vpls route-target command is not valid for a VPLS instance that uses
LDP as the signaling protocol. To configure a VPLS instance with LDP signaling, use
the mpls ldp vpls vpls-id command and the mpls ldp vpls neighbor command.
NOTE: The bridge vpls route-target command is available for a VPLS instance only
after you issue the bridge vpls transport-virtual-router command, which creates the
VPLS instance and configures the transport virtual router.
Options
Global Configuration
Mode
An update message with a route-target export list advertises a route.
That list contains at least one route target that matches a route target in the
route-target import list associated with a VPLS instance.
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
import Adds the route target to the specified VPLS instance's import list; the
VPLS instance accepts only routes that have at least one route target that matches
a route target in the import list
export Adds the route target to the specified VPLS instance's export list; all
routes advertised from this VPLS instance are associated with the export list
both Adds the route target to both the import list and export list of the specified
VPLS instance. This is the recommended setting for a VPLS instance
extendedCommunity—Two-part number in the format number1:number2 that
identifies an extended community of VPNs, where:
number1 Autonomous system (AS) number or an IP address
number2 Unique integer; 32 bits if number1 is an AS number; 16 bits if
number1 is an IP address
Chapter 3: B Commands
bridge vpls route-target
325