Bridge Aging-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bridge aging-time

bridge { bridgeGroupName | vplsName } aging-time seconds
Syntax
no bridge { bridgeGroupName | vplsName } aging-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
vplsName variable added in JUNOSe Release 7.1.0.
Sets the aging time of a dynamic (learned) entry in the forwarding table of a bridge
Description
group or VPLS instance. The aging time is the length of time, in seconds, that an
entry can remain in the forwarding table. An entry expires from the forwarding table
when it reaches the specified aging time. The no version restores the default value,
300 seconds.
Options
Global Configuration
Mode
Related Topics
316
bridge aging-time
bridgeGroupName Name of a bridge group specified with the bridge command
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
seconds Aging time in the range 10–1000000 seconds
Configuring Optional Attributes for VPLS Instances in the JUNOSe BGP and MPLS
Configuration Guide