Ip Flow-Aggregation Cache - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

ip flow-aggregation cache

Syntax
Release Information
Description
Options
Mode
794
[ no ] ip flow-aggregation cache [ as | destination-prefix | prefix | protocol-port |
source-prefix ]
Command introduced in JunosE Release 8.1.0.
Creates an aggregation cache and accesses Flow Cache Configuration mode. The no
version removes the aggregation cache and its configuration.
as—Specifies autonomous system aggregation
destination prefix—Specifies destination prefix aggregation
prefix—Specifies prefix aggregation
protocol-port—Specifies protocol port aggregation
source-prefix—Specifies source prefix aggregation
Flow Cache Configuration, Global Configuration
Copyright © 2010, Juniper Networks, Inc.