Bridge - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bridge

[ no ] bridge bridgeGroupName
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates a bridge group to use for transparent bridging. A bridge group is a named
Description
collection of network interfaces (ports) on an E Series router that forms a broadcast
domain. Each bridge group has its own set of forwarding tables and filters and, as
such, functions as a logical bridging device. The no version removes the bridge group
configuration from the router.
To configure an existing bridge group as a VPLS instance, you must use the bridge
vpls transport-virtual-router command.
NOTE: Do not assign the bridge group the same name as an existing virtual router
configured on the router.
Options
Global Configuration
Mode
312
bridge
bridgeGroupName Name of the bridge group; string of up to 32 alphanumeric
characters