Bridge Subscriber-Policy - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bridge subscriber-policy

bridge { bridgeGroupName | vplsName } subscriber-policy subscriberPolicyName
Syntax
no bridge { bridgeGroupName | vplsName } subscriber-policy
[ subscriberPolicyName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
vplsName variable added in JUNOSe Release 7.1.0.
Associates the subscriber (client) interfaces that belong to a bridge group or to a VPLS
Description
instance with a nondefault subscriber policy. The no version removes the association
with the subscriber policy.
You cannot associate a nondefault subscriber policy with trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot associate a
nondefault subscriber policy with the VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) devices.
Options
Global Configuration
Mode
322
bridge subscriber-policy
bridgeGroupName Name of a bridge group specified with the bridge command
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
subscriberPolicyName Name of the subscriber policy specified with the
subscriber-policy command