Bridge1483 Service-Profile - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bridge1483 service-profile

[ no ] bridge1483 service-profile profileName
Syntax
Command introduced in JUNOSe Release 9.0.0.
Release Information
Assigns the specified IP service profile to the interface profile from which a dynamic
Description
bridged Ethernet interface is created. The IP service profile must be defined in the
default virtual router. The no version removes the IP service profile assignment from
the interface profile.
Options
Profile Configuration
Mode
profileName Name of the IP service profile; maximum of 32 alphanumeric
characters
Chapter 3: B Commands
bridge1483 service-profile
311