Boot Subsystem - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

boot subsystem

boot [ backup ] subsystem subsysName relFileName
Syntax
no boot [ backup ] subsystem [ subsysName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the selected subsystem to use the specified release the next time the
Description
subsystem is booted. The no version disables the subsystem. The backup option
enables you to specify a backup release for the module in the specified slot in case
the module reboots more times than allowed within the period specified by the boot
revert-tolerance command.
Options
Global Configuration
Mode
backup Configures a backup setting
subsysName Name of the subsystem to be configured
relFileName Name of system software file to use
Chapter 3: B Commands
307
boot subsystem