Boot Force-Backup - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 3: B Commands

boot force-backup

[ no ] boot force-backup
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Forces the router to use the backup software release file or router configuration file
Description
on the next boot. The no version sets the router to use the default release or
configuration file on the next boot.
NOTE: After the router has used the backup settings, the no boot force-backup
command is the only way to get the router to use the default settings again.
Global Configuration
Mode
303
boot force-backup