JUNOSe 11.1.x Command Reference Guide A to M
boot system
boot system relFileName
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the software release (.rel) file to use on reboot. There is no no version.
Description
NOTE: In a dual SRP module configuration, when this information is synchronized
to the standby SRP module, the standby SRP module is reloaded to boot the specified
release. The high availability feature requires the release to be the same on the active
and the standby SRP modules. This means that arming the system to boot with a
different release causes the standby module to reload and prevent high availability
from becoming active or to disable high availability if it is active or pending.
Options
Global Configuration
Mode
308
boot system
relFileName Name of the software release file (.rel) that contains the software
release