Ip Vrrp Advertise-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip vrrp advertise-interval
Syntax
Release Information
Description
Options
Mode
968
ip vrrp vrid advertise-interval advertiseInterval [ seconds | milliseconds ]
no ip vrrp vrid advertise-interval
Command introduced before JunosE Release 7.1.0.
Configures the VRRP advertisement interval time. You must use seconds to comply with
RFC 2338. Use milliseconds only if all VRRP instances peering for the given VRID are
composed of E Series routers. The no version restores the default value, 1 second.
vrid—VRID identifier; a number in the range 1–255
advertiseInterval—Advertisement period in seconds or milliseconds; in the range 1–255
seconds or 100–255000 milliseconds
seconds—Specifies interval in seconds
milliseconds—Specifies interval in milliseconds
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
