Inet6-Advertise-Interval; N-Plus-N - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

inet6-advertise-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

n-plus-n

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1210
®
OS for EX Series Ethernet Switches, Release 10.4
inet6-advertise-interval milliseconds;
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Configure the interval between Virtual Router Redundancy Protocol (VRRP) IPv6
advertisement packets.
—Interval, in milliseconds, between advertisement packets.
milliseconds
Range: 100 to 40,000 ms
Default: 1 second
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP for IPv6 (CLI Procedure) on page 1189
n-plus-n;
[edit chassis psu redundancy]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure N+N power supply redundancy for power management on an EX8200 switch.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Power Supply Redundancy (CLI Procedure) on page 1194
Copyright © 2010, Juniper Networks, Inc.