Advertise-Interval; Age - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

advertise-interval

advertise-interval milliseconds;
Syntax
Hierarchy Level [edit interfaces interface-name sonet-options aps]
Statement introduced before JUNOS Release 7.4.
Release Information
Modify the Automatic Protection Switching (APS) interval at which the protect and
Description
working routers send packets to their neighbors to advertise that they are operational.
A router considers its neighbor to be operational for a period, called the hold time,
that is, by default, three times the advertisement interval.
Options milliseconds
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

age

age (30m | 10m | 1m | 30s | 10s);
Syntax
[edit protocols oam ethernet connectivity-fault-management linktrace]
Hierarchy Level
Statement introduced in JUNOS Release 8.5.
Release Information
Time to wait (in minutes or seconds) for a response. If no response is received, the
Description
request and response entry is deleted from the linktrace database.
10 minutes
Default
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
964
advertise-interval
—Interval between advertisement packets.
Range: 1 through 65,534 milliseconds
Default: 1000 milliseconds
Configuring APS Timers on page 923
Configuring Linktrace Protocol in CFM on page 715