Table of Contents
Advertisement
Command Reference Guide
ip rip receive version
Use the ip rip receive version command to configure the Routing Information Protocol (RIP) version the
unit accepts in all RIP packets received on the interface. Use the no form of this command to restore the
default value. Variations of this command include:
ip rip receive version 1
ip rip receive version 2
Syntax Description
1
2
Default Values
By default, all interfaces implement RIP version 1 (the default value for the version command).
Command History
Release 1.1
Release 15.1
Functional Notes
Use the ip rip receive version command to specify a RIP version that will override the version (in the
Router RIP) configuration.
AOS only accepts one version (either 1 or 2) on a given interface.
Usage Examples
The following example configures a BVI to accept only RIP version 2 packets:
(config)#interface bvi 1
(config-bvi 1)#ip rip receive version 2
60000CRG0-35E
Accepts only received RIP version 1 packets on the interface.
Accepts only received RIP version 2 packets on the interface.
Command was introduced.
Command was expanded to include the bridged virtual interfaces (BVIs).
Copyright © 2012 ADTRAN, Inc.
BVI Interface Command Set
2071
Advertisement
Table of Contents
