Table of Contents
Advertisement
Command Reference Guide
mac-address <mac address>
Use the mac-address command to specify the medium access control (MAC) address of the virtual local
area network (VLAN) interface. Only the last three values of the MAC address can be modified. The first
three values contain the ADTRAN reserved number (00:0A:C8) by default. Use the no form of this
command to return to the default MAC address programmed by ADTRAN.
Syntax Description
<mac address>
Default Values
A unique default MAC address is programmed in each unit shipped by ADTRAN.
Command History
Release 5.1
Release 15.1
Usage Examples
The following example configures a MAC address of 00:0A:C8:5F:00:D2 for BVI 1:
(config)#interface bvi 1
(config-bvi 1)#mac-address 00:0A:C8:5F:00:D2
60000CRG0-35E
Specifies a valid 48-bit MAC address. MAC addresses should be expressed
in the following format xx:xx:xx:xx:xx:xx (for example, 00:A0:C8:00:00:01).
Command was introduced.
Command was expanded to include the bridged virtual interfaces (BVIs).
Copyright © 2012 ADTRAN, Inc.
BVI Interface Command Set
2079
Advertisement
Table of Contents
