ADTRAN AOS Version R10.1.0 Command Reference Manual page 2065

Adtran operating system (aos)
Table of Contents

Advertisement

Command Reference Guide
ip ospf
Use the ip ospf command to customize open shortest path first (OSPF) settings (if needed). Use the no
form of this command to return to the default setting. Variations of this command include:
ip ospf authentication-key <password>
ip ospf cost <value>
ip ospf dead-interval <seconds>
ip ospf hello-interval <seconds>
ip ospf message-digest-key [1 | 2] md5 <key>
ip ospf priority <value>
ip ospf retransmit-interval <seconds>
ip ospf transmit-delay <seconds>
Syntax Description
authentication-key <password>
cost <value>
dead-interval <seconds>
hello-interval <seconds>
message-digest-key [1 | 2] md5 <key>
priority <value>
retransmit-interval <seconds>
transmit-delay <seconds>
Default Values
dead-interval <seconds>
hello-interval <seconds>
retransmit-interval <seconds>
transmit-delay <seconds>
60000CRG0-35E
Assigns a simple-text authentication password to be used by
other routers using the OSPF simple password authentication.
Specifies the OSPF cost of sending a packet on the interface.
This value overrides any computed cost value. Range is
1 to 65535.
Sets the maximum interval (in seconds) allowed between hello
packets. If the maximum is exceeded, neighboring devices will
determine that the device is down. Range is 0 to
65535 seconds.
Specifies the interval (in seconds) between hello packets sent
on the interface. Range is 0 to 65535 seconds.
Configures OSPF message digest 5 (MD5) authentication
(16 byte maximum) keys.
Sets the OSPF priority. The value set in this field helps
determine the designated router (DR) for this network. Range is
0 to 255.
Specifies the interval (in seconds) between link state
advertisements (LSAs). Range is 0 to 65535 seconds.
Sets the estimated time (in seconds) required to send a link
state advertisement (LSA) on the interface. Range is 0 to
65535 seconds.
40 seconds
10 seconds: Ethernet, bridged virtual interface (BVI), Tunnel,
and Point-to-Point Protocol (PPP)
5 seconds
1 second
Copyright © 2012 ADTRAN, Inc.
BVI Interface Command Set
2065

Advertisement

Table of Contents
loading

Related Products for ADTRAN AOS Version R10.1.0

This manual is also suitable for:

Aos r10.1.0

Table of Contents